GeoVision GV-IP Decoder Box Series User Manual

Introduction
19
1
No. Name Function
5 DC 12V Connect to power using the supplied power adapter.
6 USB
Connect to a GV-Joystick V2, USB mouse, or USB storage device for
local storage of content and firmware upgrade.
7 Line Out Port Connect to a headphone or speaker.
8 Default
Reset the device to the default settings. Use a pin to press the default
button for about 5 to 10 seconds. The system will then reset and
reboot itself shortly. See 5.2 Restoring Default Settings.

GeoVision GV-IP Decoder Box Series Specifications

General

Brand	GeoVision
Model	GV-IP Decoder Box Series
Category	Digital Camera
Language	English