GeoVision GV-IP Decoder Box Series User Manual

30
3. To change the device settings, right-click the device and select Edit to modify the
following settings:
 Custom Name: Type a customized name for the IP device.
 Port: Change the port number if needed. The default port is 10000.
 Loop Time Interval: Specify a time interval, ranging from 10 ~ 600 seconds, for the
device to display before switching to the next one. The default value is 30 seconds.
 Login Information: The default user name and password are both admin.
4. Click Save to apply.
Note: All the GeoVision IP devices have the default user name and password of admin. If
you want to change the default settings, you may change the user name and password
under Camera in System Settings (see 4.6 Camera).
5. Select a live view layout.
For GV-IP Decoder Box Ultra:
Figure 2-9
For GV-IP Decoder Box Plus / Lite / GV-Pad Mini:
Figure 2-10

GeoVision GV-IP Decoder Box Series Specifications

General

Brand	GeoVision
Model	GV-IP Decoder Box Series
Category	Digital Camera
Language	English