Accessing Live View
41
3
Capture Snapshot: Only supported by GV-IP Decoder Box Ultra / Plus / GV-Pad Mini,
capture a snapshot of the live view. This option is only available when the live view grid
is not looping. See 3.2 Capturing Snapshots.
Play Mode: When more than one device is added to a grid, select Loop to start looping
through the devices or select a device number to fix the live view grid to the selected
device. A looping icon
or will appear on the live view grid if you select Loop.
Note: To fix the live view grid to a selected device for GV-IP Decoder Box Ultra, click
Camera Switch and click the desired camera number.
PTZ: Select to allow GV-Joystick V2 / your mouse / GV-IR Remote Control to control the
PTZ device. To pan and tilt the live view, click and hold the arrow on the image. This
function is only available for devices with PTZ function and only one PTZ device can be
enabled at a time.
To Next Page
Loading...
