GeoVision GV-SNVR0410F User Manual

Getting Started
40
2
5. Assemble the cover with the device by tightening the screws on both sides and the rear
side.
The hard drive is now ready for use.
2.1.6 GV-SNVR0412 / 0812
Installing the Hard Drive
Follow the steps below to install the hard drive to GV-SNVR0412 / 0812.
1. Unscrew the two screws on both sides and the two screws on the rear to remove the
cover.
Figure 2-25
2. Place the hard drive in the driver drawer.
Figure 2-26

GeoVision GV-SNVR0410F Specifications

General

Brand	GeoVision
Model	GV-SNVR0410F
Category	Recording Equipment
Language	English