System Configuration
82
3
3.6 Service
3.6.1 Connecting to GV-Center V2 and GV-Vital Sign Monitor
In the Service settings, you can connect GV-SNVR to central monitoring station software
GV-Center V2 and GV-Vital Sign Monitor (VSM).
1. Click Active to enable connection with GV-Center V2 or GV-Vital Sign Monitor (VSM).
Figure 3-15
2. Type the IP Address or the domain name of GV-Center V2 or GV-Vital Sign Monitor.
3. Modify the Port if needed.
4. Type the Username and Password of GV-Center V2 or GV-Vital Sign Monitor.
5. Only for GV-SNVR0411 / 0412 / 0811 / 0812 / 1600 / 1611 / 1612, select camera
channels for Motion and Video Lost events alert. When either of these events occurs
on the selected cameras, GV-SNVR will send notifications or videos to GV-Center V2 or
GV-Vital Sign Monitor.
To Next Page
Loading...
Need help?
General
