83
6. Only for GV-SNVR0412 / 0812 / 1611 / 1612 under the Center V2 tab,
˙ Select the desired input alarms. GV-SNVR will send notifications to GV-Center V2
upon the input triggers.
˙ In Schedule Setting, configure the schedules for sending notifications to GV-
Center V2. You can configure up to 3 schedules by selecting a Index and then
defining a period of time for weekdays or for weekend.
7. Click Apply. A green icon will appear if the connection is established successfully.
Note:
1. For compatible versions of GV-Center V2 and GV-Vital Sign Monitor, see 1.4.2
Supported GeoVision Applications for details.
2. For GV-Center V2, the audio function of live view is only supported in Single Live
View Window, and the IP device must be connected through stream 1.
3. For GV-Vital Sign Monitor, the Video Log Storage function is not supported when
viewing subscriber status.
3.6.2 Regulating People Flow with GV-IP Cameras
For GV-SNVR0412 / 0812 with firmware version V1.05 / V1.10 or later only, by integrating
GV-TDR2700 series, of firmware version V1.03 or later, the PPL tab on the Service page
can monitor the total people count at a vicinity and trigger output alarms and/or send out e-
mail alerts accordingly when the predefined limit is reached for effective people flow control.
See here
for the detailed setup and related settings.
To Next Page
Loading...
Need help?
General
