X350 3D-Printer Quick Start Guide
Seite: 18/29
Stand: 2016/03/24 13:55
© German RepRap GmbH 18/29
Problem Solution
There is no material coming
out of the nozzle, or the
material flow is inconsistent
Rectify contact pressure at the extruder, clean Hot-End, check filament
feed
The printed object comes
loose from the printing bed
Clean the printing bed, if necessary lubricate it with acetone (NOT if
you have a BuildTak overlay), printing overlay may be worn out (PET
film), distance between nozzle and printing board may be wrong
Support
We provide support and all the documentation.
Documentation
You'll find all the documentation online at http://wiki.germanreprap.com . Please register with the site
at wiki.germanreprap.com in order to be able to automatically send notifications and changes of
documents you are interested in via email.
Telephone
Our hotline is staffed from Monday to Friday (excluding public holidays) between 10:30 - 16:00 and
can be reached at +49 9001 RepRap ( +49 9001 737727)
10)
. We answer your technical
questions and provide consulting for more complex setups.
0.99 € per minute from a landline in Germany, prices may vary depending on your landline telephone,
VOIP or mobile phone provider
Support tickets / E-mail
Please use our support pages at https://support.germanreprap.com to lodge a new ticket and check
the status of an old one, all free of charge.
To Next Page
Loading...