X350 3D-Printer Quick Start Guide
Seite: 26/29
Stand: 2016/03/24 13:55
© German RepRap GmbH 26/29
Links
X350 Flyer
Download CE Konformitätserklärung
Simplify3D™
1)
manufacturer’s information
2)
,
3)
,
5)
our recommendation
4)
cover of printbed
6)
material is hygroscopic and therefore limited storable
7)
material is hygroscopic and therefore limited storable, in case of bubbles during pint it can be dried
in an oven at about 80°C for ca. 3-4 hours
8)
Material kann nur mit dem DD3 Extruder verarbeitet werden!
9)
Sollte dauerhaft nur mit einer Edelstahldüse verarbeitet werden, da extrem abrasiv
10)
0.99€/minute from a landline in Germany, prices may vary depending on your landline telephone,
VOIP or mobile phone provider
From:
http://wiki.germanreprap.com/ - German RepRap Wiki
Permanent link:
http://wiki.germanreprap.com/en/x350/quick_start
Last update: 2016/03/14 16:45
To Previous Page
Loading...