German RepRap X350 - Technical Data

X350 3D-Printer Quick Start Guide
Seite: 4/29
Stand: 2016/03/24 13:55
© German RepRap GmbH 4/29
tried and tested software Simplify3D™, an innovative filament management system with an
automated feeder, and the easy to level 3-point printing bed.
The X350 runs with our most recent drive technology. The DD3-Extruder and the Full-Metal-Hot end
are easy to control. The highlights: No adjusting necessary, and a variable contact pressure for soft
materials.
Technische Daten
Material: ABS (Acrylonitrile butadiene styrene-copolymer), PLA (Polylactic acid), PS (Polystyrol), PP
●
(Polypropylen), PVA (Polyvinylalkohol), Wood, Laybrick in 1,75mm
Material management: innovative filament management
●
Dimensions: (B / H / T) 600 x 444 x 517 mm
●
Printing volume: (X / Y / Z) 350 x 200 x 210 mm
●
Operating voltage: 110/230V Wechselspannung
●
POWER CONSUMPTION: 250 W
●
Power consumption: ca. XXX W
●
Setup: Prefabricated unit / Ready-to-print
●
Technology: FFF (Fused Filament Fabrication)
●
Layer thickness: ab 0,02mm
●
Printing speed: 10 - 150 mm/s
●
Traverse speed: 10 - 300 mm/s
●
Printing bed: 3-Punktauflage, beheizbar bis max. 120°C
●
Network: WLAN/Ethernet
●
Weight: ca. 29kg
●
Nozzle: 0,4mm
●
Content
X350 3D-Printer
●
1 * Coil holder
●
LCD Display (installed)
●
SD-Card reader (installed)
●
Heated ceramic printing bed (installed)
●
Simplify3D™ Software
●
4GB SD-Card
●
Spatula
●
Cleaning brush
●
Nozzle tool
●
Quick Start Guide
●
Ethernet network cable
●
Power cord
●
Filament sample
●