Getac S510 - Using Various Card Readers; Using Storage Cards (Optional)

48
Using Various Card Readers
Using Storage Cards (Optional)
A storage card reader reads from and writes to removable storage cards (or
called memory cards). Your card reader supports microSD (Secure Digital)
and microSDXC (Secure Digital eXtended Capacity) cards.
To insert a storage card:
1. Locate the microSD card reader on the right side of the computer and
open the cover.
2. Align the card with its connector pointing to the slot and its label facing
up. Slide the card into the slot until it reaches the end.
3. Close the cover.
4. Windows will detect the card and assign it a drive name.
To remove a storage card:
1. Open File Explorer and click Computer.
2. Right-click the drive with the card and select Eject.
3. Slightly push the card to release and then pull it out of the slot.
4. Close the cover.