Getac S510 - Boot Menu; Exit Menu

59
Boot Menu
The Boot menu sets the sequence of the devices to be searched for the
operating system.
Press the arrow key to select a device on the boot order list and then press
+/– key to change the order of the selected device.
The [X] sign after a device name means the device is included in the search.
To exclude a device from the search, move to the [X] sign of the device and
press Enter.
 Fast Boot enables or disables the “Fast Boot” mode in which the system
skips the USB Device Enumeration when resuming from hibernation or
hybrid shutdown.
 Alternative WBM option enables or disables WBM (Windows Boot
Manager). If your computer has multiple operating systems, enable this
item so that you can choose a specific one from a list of operating
systems whenever the computer boots up.
Exit Menu
The Exit menu displays ways of exiting BIOS Setup Utility. After finishing
with your settings, you must save and exit so that the changes can take
effect.
 Exit Saving Changes saves the changes you have made and exits BIOS
Setup Utility.
 Exit Discarding Changes exits BIOS Setup Utility without saving the
changes you have made.
 Load Setup Defaults loads the factory default values for all the items.
 Discard Changes restores the previous values for all the items.
 Saves Changes saves the changes you have made.