Password on Boot allows you to enable or disable the entering of password
for booting up your system. Once the password is successfully set and this
item is enabled, it is required for booting up the system.
TPM Support enables or disables TPM (Trusted Platform Module) support.
The TPM is a component on your computer’s mainboard that is specifically
designed to enhance platform security by providing a protected space for
key operations and other security critical tasks. Using both hardware and
software, TPM protects encryption and signature keys at their most
vulnerable stages – operations when the keys are being used unencrypted in
plain-text form. TPM is specifically designed to shield unencrypted keys and
platform authentication information from software-based attacks.
Current TPM State Change TPM State
TPM Support
Current TPM State shows the current TPM state.
Change TPM State allows you to select between
No Change
,
Clear
,
Deactivate & Disable
, and
Enable & Activate
.
To Next Page
Loading...
Need help?
General
