Getac V100 User Manual

Intel Trusted Execution enables utilization of additional hardware
capabilities provided by Intel® Trusted Execution Technology.
Intel AMT Setup Prompt sets if the prompt for entering Intel AMT Setup
appears during POST. If disabled, you cannot enter Intel AMT Setup.
Security Menu
The Security menu contains the security settings, which safeguard your
system against unauthorized use.
Main
Advanced
Security
Boot
Exit
Supervisor Password Is:
User Password Is:
Set Supervisor Password:
Set User Password
Password on boot:
TPM Support
Current TPM State
Change TPM State
Set
Clear
[Enter]
[Enter]
[Disabled]
[Eabled]
UNKNOWN
[Enable & Activated]
Item Specific Help
Supervisor Password
controls access to the
setup utility.
F1 Help ↑↓ Select Item -/+ Change Values F9 Setup Defaults
Esc Exit ←→ Select Menu Enter Select  Sub-Menu F10 Save and Exit
Supervisor/User Password Is shows whether you have set the
supervisor/user password or not for the system.
Set Supervisor/User Password sets the supervisor/user password. When
typing the password, first make sure that Num Lock is off, and then type the
password in the entry fields and press Enter. Confirm your password by
typing it again and pressing Enter. You can set the supervisor/user password
to be required for starting up the system and/or entering BIOS Setup.
Enter

Getac V100 Specifications

General

Brand	Getac
Model	V100
Category	Laptop
Language	English