Taking Pictures
1. Start the Getac Camera program. You will be in Camera Mode.
2. For camera settings such as timer, brightness, etc., tap . (See
“Camera Settings” for detailed information.)
If needed, you can turn on/off GPS lock or watermark using the buttons
on the right. (See “Camera Controls” for detailed information.)
3. Aim the camera lens at your subject.
Tap and hold the button for focusing. A white plus sign and frame
appear. Wait until the subject is in focus.
4. When ready, you can shoot the picture in either of the two methods:
Method 1: Tap the button.
Method 2: Drag the preview image and drop it
into Thumbnail Tray.
5. The picture will appear in the middle of the Thumbnail View and be
saved to the predefined storage location.
To Next Page
Loading...
Need help?
General
