Getac V100 User Manual

BIOS Setup
When to Use
You need to run BIOS Setup Utility when:
 You see an error message on the screen requesting you to run BIOS
Setup Utility.
 You want to restore the factory default BIOS settings.
 You want to modify some specific settings according to the hardware.
 You want to modify some specific settings to optimize the system
performance.
How to Use
Starting BIOS Setup



To run BIOS Setup Utility, press the F2 key when the prompt appears on the
screen during the system startup. The prompt shows up on the screen for
only a few seconds. You must press the F2 key quickly. The BIOS Setup Utility
main screen appears as shown next.

Getac V100 Specifications

General

Brand	Getac
Model	V100
Category	Laptop
Language	English