Getac V110 Series - Opening and Closing the Cover

4
Opening and Closing the Cover
To open the top cover:
1. Pull loose the cover latch (

) and release the clamp (

).
2. Lift up the cover (

). You can tilt the cover forward or backward for
optimal viewing clarity.
To close the top cover:
1. Close the display.
2. Lift the cover latch and engage the clamp on the display. Then, push in
the cover latch to click it into place.
CAUTION: Before engaging the clamp, make sure the two guide pins are
correctly seated in place.
Correct: guide pin
correctly seated
Wrong: guide
pin not seated
Correct: guide pin
correctly seated
Wrong: guide
pin not seated