Getac V110 Series - LAN Problems; Power Management Problems; Sensor Problems

80
LAN Problems
I cannot access the network.
 Make sure that the LAN cable is properly connected to the RJ-45
connector and the network hub.
 Make sure that the network configuration is appropriate.
 Make sure that the user name or password is correct.
Power Management Problems
The computer does not enter Sleep or Hibernation mode
automatically.
 If you have a connection to another computer, the computer does not
enter Sleep or Hibernation mode if the connection is actively in use.
 Make sure that the Sleep or Hibernation time-out is enabled.
The computer does not enter Sleep or Hibernation mode
immediately.
 If the computer is performing an operation, it normally waits for the
operation to finish.
The computer does not resume from Sleep or Hibernation mode.
 The computer automatically enters Sleep or Hibernation mode when the
battery pack is empty. Do any one of the following:
− Connect the AC adapter to the computer.
− Replace the empty battery pack with a fully charged one.
Sensor Problems
The built-in digital compass doesn’t seem to be accurate.
 Rotating the display can affect the accuracy of the digital compass. This
is normal, not a malfunction. The sensors for the compass require periodic
recalibration. Follow this method to recalibrate the sensors:
1. Make sure you are far away from any large metal objects or magnetic
fields.