Getac V110 Series - Network and Wireless Connectivity

32
Using Network and Wireless
Connections
Using the LAN
To connect the network cable to the LAN module, connect one end of the
LAN cable to the RJ-45 connector on the computer and the other end to the
network hub.
Using the WLAN
The WLAN (Wireless Local Area Network) module of your computer
supports IEEE 802.11a/b/g/n/ac
Turning On/Off the WLAN Radio
To turn on the WLAN radio:
Click  Settings  Network & Internet  Wi-Fi. Slide the Wi-Fi switch
to the On position.
To turn off the WLAN radio:
You can turn off the WLAN radio the same way you turn it on.
If you want to quickly turn off all wireless radio, simply switch on Airplane
mode. You can control the Airplane mode using one of the below methods.
 Press Fn+F1.
 Use the Airplane Mode button in the OSD Control Panel.
 Click  Settings  Network & Internet  Airplane mode.