Getac V110 Series User Manual

18
Using the Tether
A tether is available for attaching the stylus to your computer.
1. Insert one of the tether’s loop ends through the hole of the stylus (as
indicated by

below). Then, insert the other end through the first loop
(as indicated by

below) and pull it tight.
2. If you have the carrying strap:
Insert the other loop end to the strap holder on computer (as indicated
by

below). Then, insert the stylus end through the loop (as indicated
by

below) and pull it tight.

Getac V110 Series Specifications

General

Operating System	Windows 10 Pro
Display	11.6-inch
Resolution	1366 x 768
Storage	512GB SSD
Rugged Features	MIL-STD-810G, IP65
Graphics	Intel HD Graphics
Wireless	Wi-Fi 802.11ac
Ports	HDMI
Battery	Li-Ion
Connectivity	Optional 4G LTE
Processor	Intel Core i5 or i7