Getac V110 Series User Manual

51
Using Various Card Readers
Using Smart Cards
NOTE: You do not have the smart card slot if your model comes with the
barcode reader.
With an embedded microcontroller, smart cards have the unique ability to
store large amounts of data, carry out their own on-card functions (e.g.,
encryption and mutual authentication), and interact intelligently with a
smart card reader.
To insert a smart card:
1. Locate the smart card reader. Open its protective cover by lifting up the
tab of the cover.
2. Slide the smart card, with its label and embedded computer chip facing
up into the slot.
3. When closing the cover, push the tab downward until the cover clicks
into place.
To remove a smart card:
1. Make sure that the software is not accessing the smart card.
2. Open the cover.
3. Slightly push the card to release and then pull it out of the slot.
4. Close the cover.
Chip

Getac V110 Series Specifications

General

Operating System	Windows 10 Pro
Display	11.6-inch
Resolution	1366 x 768
Storage	512GB SSD
Rugged Features	MIL-STD-810G, IP65
Graphics	Intel HD Graphics
Wireless	Wi-Fi 802.11ac
Ports	HDMI
Battery	Li-Ion
Connectivity	Optional 4G LTE
Processor	Intel Core i5 or i7