Getac V110 Series User Manual

56
5. To install the RAM module, match the module’s notched part with the
socket’s projected part and firmly insert the module into the socket at a
20-degree angle (

). Then push down until the retaining clips lock the
module into position (

).
CAUTION: If the RAM module is difficult to insert or difficult to push down, do
not force it. Check once more to ensure that the module is positioned correctly.
6. Replace the plastic bar and secure with two screws.
7. Close the compartment cover and secure with 8 screws.
8. Replace the battery packs.

Getac V110 Series Specifications

General

Operating System	Windows 10 Pro
Display	11.6-inch
Resolution	1366 x 768
Storage	512GB SSD
Rugged Features	MIL-STD-810G, IP65
Graphics	Intel HD Graphics
Wireless	Wi-Fi 802.11ac
Ports	HDMI
Battery	Li-Ion
Connectivity	Optional 4G LTE
Processor	Intel Core i5 or i7