Getac V110 Series User Manual

87
a portion of your hard disk drive that is set aside by the manufacturer to
hold the original image of your system.
WARNING:
 Using this feature will reinstall Windows to your system and configure it to
the system’s factory default settings. All data on the hard disk drive will be
lost.
 Make sure that power is not interrupted during the recovery process. An
unsuccessful recovery may result in Windows startup problems.
To restore your system to the factory default state:
1. Connect the AC adapter.
2. Run BIOS Setup Utility. Select Advanced  Recovery Partition. (See
Chapter 5 for more information.)
3. Follow the onscreen instructions to complete the process.

Getac V110 Series Specifications

General

Operating System	Windows 10 Pro
Display	11.6-inch
Resolution	1366 x 768
Storage	512GB SSD
Rugged Features	MIL-STD-810G, IP65
Graphics	Intel HD Graphics
Wireless	Wi-Fi 802.11ac
Ports	HDMI
Battery	Li-Ion
Connectivity	Optional 4G LTE
Processor	Intel Core i5 or i7