8
Maintenance
Monthly inspections
38 / 44
Maquet Orchide
IFU 04661 EN 02
8 Maintenance
To preserve your device’s original performance and reliability levels, annual maintenance and in-
spections should be performed as follows. During the guarantee period, maintenance and inspec-
tions must be performed by a Getinge technician or a Getinge-approved dealer. After this period,
maintenance and inspections may be performed by a Getinge technician, a Getinge-approved
dealer or a hospital technician trained by Getinge. Please contact your dealer to undergo the
technical training required.
8.1 Monthly inspections
Illustration Action
Absence of particles
1. Check that there are no particles which could cause
friction in the Quick Lock interface; remove any dust
from the areas concerned on the camera/handle and
the lighthead.
2. If a problem is noted, contact technical support.
Tab.13: Monthly visual and functional inspections
8.2 Contact
The contact details of your local Getinge representative can be found on https://
www.getinge.com/int/contact.
To Next Page
Loading...
Need help?
General
