Inspections
Mechanical inspections
6
Maquet PowerLEDII
01810 EN 03
33 / 56
Fig.40: Lighthead
• Check that the silicone covers, seals and cover are not loose.
• Check that there are no cracks or scratches on the underside.
Fig.41: Monitor mount
• Check the position of the stops for the ori-
entation angles.
• Check that the handle mount is firmly at-
tached.
• Check that the VESA interface is firmly at-
tached to the mount and monitor.
• Check that the Rear Box and its contents
are securely fastened.
• Check that the caps are fully inserted.
• Check that the adjustment of the brake
screws has been performed.
Fig.42: MHS0 cable guide
• If a cable guide solution is fitted, check
that the clips are fastened securely.
To Next Page
Loading...
Need help?
General
