Getinge Maquet PowerLED II Maintenance Manual

6
Inspections
Electrical inspections
42 / 56
Maquet PowerLEDII
01810 EN 03
XHS0 monitor mount
or
1
2
3
4
Fig.55: XHS0 electrical safety test
• If the monitor mount does not include any accessories, the measurement should be made
between the flange 1 and one of the monitor mounting screws 2 .
• If the monitor mount includes a handle option, the measurement should be made between
the flange 1 and one of the handle mount mounting screws 3 . Once the measurement is
complete, replace the cap.
• If the monitor mount includes a Rear Box option, the measurement should be made between
the flange 1 and one of the case mounting screws 4 , with case cover removed. Once the
measurement is complete, replace the cover.

Getinge Maquet PowerLED II Specifications

General

Brand	Getinge
Model	Maquet PowerLED II
Category	Medical Equipment
Language	English