GF MSA 4.0 - 3.4 Fusion Preparation; 3.6 Traceability Settings; 3.7 Welder Identification

Configuration settings Operating manual MSA 4
17
MACHINE SETUP 22°C
SERVICE MODE
MODIFY SERVICE OPTION
ACCESS PROTECTED BY PASSWORD 09:16 11.03.14
MACHINE SETUP
22°C
TRACEABILITY MODE
ENABLE/DISABLE TRACEABILITY DATA
ENTRY AS OPTIONAL OR MANDATORY 09:16 11.03.14
(*)
MACHINE SETUP
22°C
WELDER PASS
ENABLE/DISABLE OPERATOR IDENTITY AS
OPTIONAL OR MANDATORY 09:16 11.03.14
(*)
MACHINE SETUP
22°C
MEM. MANAGEMENT
ALLOW YOU TO DEFINE HOW TO MANAGE
THE PROTOCOLS STORED IN THE MEMORY 09:16 11.03.14
(*)
MACHINE SETUP
22°C
2ND PROTOCOL NUM.
ENABLE/DISABLE 2ND PROTOCOL NUMBER
09:16 11.03.14
(*)
MACHINE SETUP
22°C
PIPES LENGTH
ENABLE/DISABLE PIPES LENGTH AND
TRENCH DEPTH 09:16 11.03.14
(*)
MACHINE SETUP 22°C
EXPORT CONFIG.
SAVE THE MACHINE CONFIGURATION TO
USB MEMORY STICK IN XML FORMAT 09:16 11.03.14
(*) Visible only with administrator rights