GF MSA 4.0 - 3.8 Memory Management

Configuration settings Bedienungsanleitung MSA 4
18
3.1 Language
The LANGUAGE item, allows to choose the language of the messages displayed by the
machine as well as the language used in the welding protocol reports.
LANGUAGE SETTING
22°C
IT
SELECT THE PREDEFFERED LANGUAGE
PRESS START TO CONFIRM 09:16 11.03.14
Select by ()() the desired language and push START/OK ( I ) to confirm the setting. To
cancel the operation press STOP/ESC (O).
3.2 Calendar
The DATE/TIME menu allows to set the calendar; date and time are shown in the format:
Day / Month / Year hour : minutes
DATE/TIME SET.
22°C
11/03/14
09:16
SELECT DATE AND TIME
PRESS START TO CONFIRM 09:16 11.03.14
Select by ()() the desired value; move the cursor position by ()() to continue the
insertion. When insertion is completed, press START/OK ( I ) to confirm the setting. To cancel
instead the operation press STOP/ESC (O).
3.3 Manual Mode
The MANUAL MODE menu enable or disable the possibility to input the fusion parameters
manually.
MANUAL MODE
22°C
Enabled
ENABLE MANUAL INSERTION OF
THE FUSION PARAMETERS 09:16 11.03.14
If the manual mode will be enabled, the user can insert manually the fusion data pressing
the MENU button as soon as the machine detect the fitting resistance.