GF MSA 4.0 - 1.4 Power Supply & Control Options

Introduction Operating manual MSA 4
5
1.4 Extension Cables for Power Supply
To avoid excessive dissipation or brown out, on Extension cables, use cables with section:
 2.5mm² for cables
10m full-run;
 4mm² for cables
30m full-run.
1.5 START/STOP Card
START / STOP card can be used as alternative to the buttons on the keypad. For instance,
you can confirm the commands or start the welding process by scanning the START bar
code on the card.
The STOP barcode can be used instead to go back to the previous step.