Accident Prevention Bedienungsanleitung MSA 4
32
10 Accident Prevention
10.1 Operating the Unit
Do not let unauthorized or untrained personnel use the unit. When the unit is not in
operation, avoid unauthorized use by keeping it in a dry, locked room.
Safe operation of the fusion unit can only be ensured when the following criteria are
fulfilled:
appropriate transport
appropriate storage
operation for the correct purpose
careful handling and operation
periodic maintenance
The unit may only be used under surveillance.
All persons involved in the operation of the fusion must be properly qualified and should
follow these Operating Instructions.
Use of the unit can be dangerous, if the Operating Instructions are not followed. The unit
may not be used in surroundings having a high risk of explosion.
10.2 Check before Operation
Before each operation, check the unit for damage and whether it is able to function
properly.
10.3 Protection of the Unit
Keep the mains lead and secondary cables away from sharp edges. Make sure damaged
cables are immediately replaced by an authorized service agent.
10.4 Defect Unit
Arrange that damaged housings or other parts are replaced or repaired by an authorized
service agent. If the unit is not working properly it must be sent without hesitation to an
authorized service agent.
Only authorized and properly qualified personnel are allowed to make repairs on the unit.
Such specialized technicians must be fully aware of all the safety guidelines, maintenance
measures and possible dangers described in this manual!
To Next Page
Loading...
