GF MSA 4.0 - 4.1 View Protocols

Data Management Operating manual MSA 4
23
4 Data Management
The electro-fusion unit saves the welding protocols for each fusion cycle in the internal
memory. Data are kept till the operator deletes them or the memory is full.
To conform to ISO12176 and UNI10566 standards, the welding machine will store (and
provide for a later analysis) the following data:
The MSA’s Serial Number
Job number
Operator identity
Date/time of fusion cycle
Next revision date at the time of the jointing
Fusion cycle number
Error number and description
Fitting and fusion data

Fitting manufacturer

Fitting type

Fitting size

Fitting resistance (Ohm)

Ambient temperature (°C)

Starting primary voltage (V)

Maximum/Minimum primary voltage value (V)

Maximum/minimum primary voltage frequency (Hz)

Data input

Fusion voltage applied (V)

Fusion time (s)

Fusion energy (kJ)

Cooling time (min)

Pipes prepared

GPS Coordinates
Traceability data of fitting and pipes

Manufacturer

Component type

Production batch/Plant

Raw material

SDR

MFR

PE compound

Depth of the trench (m)

Others