GL-INET GL-MT300N-V2 Series User Manual

Page 7 | 77
2.1. Cable
Connect the router to the modem or main router via Ethernet cable to access the
Internet.
Before plugging the Ethernet cable into the WAN port of the router, you can click
Use as LAN to set the WAN port as a LAN port. That is useful when you are using
the router as a repeater. As a result, you can have one more LAN port.

GL-INET GL-MT300N-V2 Series Specifications

General

RAM	128MB DDR2
Flash Storage	16MB
WiFi Standard	802.11b/g/n
WiFi Speed	300Mbps
USB Ports	1 x USB 2.0
Power Supply	5V/2A
Dimensions	58 x 58 x 25 mm
Operating System	OpenWrt
Processor	MediaTek MT7628NN
Ethernet Ports	2 x 10/100Mbps