GL-INET GL-MT300N-V2 Series User Manual

Page 62 | 77
Follow the steps above, to enable HTTP Remote Access.
* HTTP is not encrypted, use at your own risk.*
If your router is behind NAT, you may need to set up port forward in higher level
router.
After you enable HTTP Remote Access, you can access Admin Panel anywhere
by your DDNS url as you in LAN.
8.3.5. SSH Remote Access
Follow the steps above, to enable SSH Remote Access, then you can use
Terminal tools to ssh anywhere.
8.3.6. Uninstall
If you don't want DDNS, just disable it.

GL-INET GL-MT300N-V2 Series Specifications

General

RAM	128MB DDR2
Flash Storage	16MB
WiFi Standard	802.11b/g/n
WiFi Speed	300Mbps
USB Ports	1 x USB 2.0
Power Supply	5V/2A
Dimensions	58 x 58 x 25 mm
Operating System	OpenWrt
Processor	MediaTek MT7628NN
Ethernet Ports	2 x 10/100Mbps