EasyManuals Logo

GL-INET GL-MT300N-V2 Series User Manual

GL-INET GL-MT300N-V2 Series
81 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #25 background imageLoading...
Page #25 background image
Page 21 | 77
Port: The port number that you want to open.
Protocol: The protocol used, you can choose TCP, UDP, or both TCP and UDP.
Status: Activate of Deactivate the rule.
6.3. DMZ
DMZ allows you to expose one computer to the Internet, so that all the inbounds
packets will be redirected to the computer you set.
Click DMZ and enable Open DMZ. Input the internal IP address (E.g.
192.168.8.100) of your device which is going to receive all the inbound packets.
7. VPN
GL.iNet routers have pre-installed VPN server and client in OpenVPN and
WireGuard.
Shadowsocks is not a default function and you need to install packages in Plug-
ins.
Please refer to the links below for the detailed setup instruction:
7.1. OpenVPN
GL.iNet routers have pre-installed OpenVPN server and client.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the GL-INET GL-MT300N-V2 Series and is the answer not in the manual?

GL-INET GL-MT300N-V2 Series Specifications

General IconGeneral
RAM128MB DDR2
Flash Storage16MB
WiFi Standard802.11b/g/n
WiFi Speed300Mbps
USB Ports1 x USB 2.0
Power Supply5V/2A
Dimensions58 x 58 x 25 mm
Operating SystemOpenWrt
ProcessorMediaTek MT7628NN
Ethernet Ports2 x 10/100Mbps

Related product manuals