GL-INET GL-MT300N-V2 Series User Manual

Page 3 | 77
Note: GL-AR300M-Lite has only 1 Ethernet port which works as WAN by default.
You can only connect to it via Wi-Fi when you first set up the router. Once you have
connected to it, you can change the WAN port to LAN port in Internet so that you
can connect to it via Ethernet cable.
(2) Connect via Wi-Fi
Search for the SSID of the router in your device and input the default password:
goodlife.
Note: The SSID was printed on the bottom label of the router with the following
formats:
• GL-MT300N-V2-XXX
• GL-AR150-XXX
• GL-AR300M-XXX
• GL-AR300M-XXX-NOR

GL-INET GL-MT300N-V2 Series Specifications

General

RAM	128MB DDR2
Flash Storage	16MB
WiFi Standard	802.11b/g/n
WiFi Speed	300Mbps
USB Ports	1 x USB 2.0
Power Supply	5V/2A
Dimensions	58 x 58 x 25 mm
Operating System	OpenWrt
Processor	MediaTek MT7628NN
Ethernet Ports	2 x 10/100Mbps