EasyManuals Logo

GL-INET GL-MT300N-V2 Series User Manual

GL-INET GL-MT300N-V2 Series
81 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #54 background imageLoading...
Page #54 background image
Page 50 | 77
Supported external storage devices
Router Model
USB Hard Drive
MicroSD Card
GL-MT300N-V2
-
GL-AR150 Series
-
GL-AR300M Series
-
GL-USB150
-
-
GL-MiFi
GL-AR750
GL-AR750S-Ext (Slate)
GL-B1300*
-
*Firmware 3.0 for this model has not released yet.
Note: The power consumption of USB hard drive is quite high. You should use it
with an external power supply. Otherwise, it may cause malfunction.
8.2.2. Access the storage device
You can access the contents of the external storage device from your computer
or smart phone. Please check the following guidance for the using of file sharing
among different operating systems.
Windows
1) Your network must be Home/Private. Otherwise you may not be able to see
your router in Network. if you are using Win10, you also need to enable SMB 1.0.
Win7
Go to Control panel -> Network and Internet -> Network and Sharing Center.
Find if your active network is Home network. If not, click it and change it to
Home network.
Win10
Go to Control panel -> Network and Internet -> HomeGroup. Click Change
network location.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the GL-INET GL-MT300N-V2 Series and is the answer not in the manual?

GL-INET GL-MT300N-V2 Series Specifications

General IconGeneral
RAM128MB DDR2
Flash Storage16MB
WiFi Standard802.11b/g/n
WiFi Speed300Mbps
USB Ports1 x USB 2.0
Power Supply5V/2A
Dimensions58 x 58 x 25 mm
Operating SystemOpenWrt
ProcessorMediaTek MT7628NN
Ethernet Ports2 x 10/100Mbps

Related product manuals