7.4.1. Settings
Enable VPN Policy: Turn on/off VPN policies.
Use VPN for all process on the router: Generally, the traffic of all processes
running on the router such as GoodCloud will be routed through VPN if there is a
connected VPN client (e.g. WireGuard, OpenVPN, Shadowsocks). In this case,
these processes will lose Internet if VPN is disconnected. In order to ensure a
proper operation of these processes, you can disable this option. As a result, they
will not use VPN.
Please Choose Policy: The item can be either Domain/IP (e.g. gl-inet.com /
192.168.1.1 / 192.168.1.0/24) or Mac address (24:F0:94:5C:8E:F9).
7.4.2. Add VPN policy
You can only configure either Use VPN for or Do not use VPN for. Click the arrow
to switch among Use VPN for and Do not use VPN for. To add a policy, enter the
domain/IP or Mac address into the box and then click Add. Finally, click Apply to
activate the policy.
For example, if we want to route only the traffic of gl-inet.com through VPN, we
need to add gl-inet.com under Use VPN for.
To Next Page
Loading...
Need help?
General
