GL-INET GL-MT300N-V2 Series User Manual

Page 30 | 77
7.2.1. WireGuard Server
You can set up a WireGuard server on GL.iNet router with firmware 3.0. Click +
Create a New User.
(1) Start a WireGuard server
You can simply use the default parameters of Local IP and Local Port, or you can
set your own value. Then click Start to start your own WireGuard server.

GL-INET GL-MT300N-V2 Series Specifications

General

RAM	128MB DDR2
Flash Storage	16MB
WiFi Standard	802.11b/g/n
WiFi Speed	300Mbps
USB Ports	1 x USB 2.0
Power Supply	5V/2A
Dimensions	58 x 58 x 25 mm
Operating System	OpenWrt
Processor	MediaTek MT7628NN
Ethernet Ports	2 x 10/100Mbps