GL-INET GL-MT300N-V2 Series User Manual

Page 68 | 77
8.5.2. Change the default page
The default page is located /etc/nodogsplash/htdocs/, use SSH or WinSCP to
change this page. For more information about how to use SSH and WinSCP,
please access this. You may need basic HTML and CSS knowledge to change
this page, please learn these from w3school or other sites.
If you want to change the picture on the default page, just replace the image on
/etc/nodogsplash/htdocs/portal_login.png.
After you had change the page, it need to disable Portal and enable Portal again
to enable the modified default page.
8.5.3. Disable Captive Portal
Follow the steps below to disable Captive Portal.

GL-INET GL-MT300N-V2 Series Specifications

General

RAM	128MB DDR2
Flash Storage	16MB
WiFi Standard	802.11b/g/n
WiFi Speed	300Mbps
USB Ports	1 x USB 2.0
Power Supply	5V/2A
Dimensions	58 x 58 x 25 mm
Operating System	OpenWrt
Processor	MediaTek MT7628NN
Ethernet Ports	2 x 10/100Mbps