GL-INET GL-MT300N-V2 Series User Manual

Page 2 | 77
1.2. Connect
You can connect to the router via Ethernet cable or Wi-Fi.
Note: This step only connects your devices to the local area network (LAN) of the
router. You cannot access the Internet currently. In order to connect to the Internet,
please finish the setup procedures below and then follow Internet to set up an
Internet connection.
(1) Connect via LAN
Connect your device to the LAN port of the router via Ethernet cable.

GL-INET GL-MT300N-V2 Series Specifications

General

RAM	128MB DDR2
Flash Storage	16MB
WiFi Standard	802.11b/g/n
WiFi Speed	300Mbps
USB Ports	1 x USB 2.0
Power Supply	5V/2A
Dimensions	58 x 58 x 25 mm
Operating System	OpenWrt
Processor	MediaTek MT7628NN
Ethernet Ports	2 x 10/100Mbps