Global Fire Gekko User Manual

Global Fire Equipment // globalfire.pt
ma_gekko_01_010002_en_190522
GEKKO
Fire Alarm Control Panel
INSTALLATION & COMMISSIONING MANUAL
OVERVIEW 3
INTRODUCTION 3
KEY FEATURES 3
USER & INSTALLER ACCESS CODES 4
ACCESS LEVEL 1 - General User 4
ACCESS LEVEL 2 - Authorized User Controls 4
ACCESS LEVEL 3 - Authorized Installer Controls (Programming Mode) 4
TYPICAL WIRING SCHEMATIC 5
PRIMARY SUPPLY REQUIREMENTS 6
BATTERY REQUIREMENTS 7
ABS BOX INFORMATION 8
IDENTIFYING COMPONENTS 9
GEKKO MAIN BOARD 9
COMMUNICATION INTERFACES 10
EN54 INFORMATION 11
SYSTEM LIMITATIONS 11
TERMS, DEFINITIONS AND ABBREVIATIONS 12
INSTALLATION 13
INTRODUCTION 13
CONTROL PANEL 13
Mains Power connection 13
Other Panel connections 13
REPEATERS 13
PANEL CONNECTIONS 13
GEKKO Main Board 14
GEKKO Loop Card fitting 15
COMMUNICATION CHANNELS 16
Extra Display 16
Network Repeaters 17
ANALOGUE LOOP(S) 18
CONVENTIONAL SOUNDERS 19
1

Global Fire Gekko Specifications

General

Fire and Fault Relays	1 Fire, 1 Fault
Repeater Output	Yes
Input Voltage	230V AC
Protection Rating	IP30
Zones	2

Summary

Overview

Introduction

Manual's introduction to the GEKKO fire alarm panel installation and commissioning.

Key Features

Highlights the primary capabilities and functionalities of the GEKKO fire alarm control panel.

User & Installer Access Codes

Explains the different access levels and codes for operating and configuring the GEKKO panel.

Typical Wiring Schematic

Illustrates the standard connection diagram for the GEKKO fire alarm control panel and its components.

Primary Supply Requirements

Details the electrical specifications for the main power supply, including voltage and EMC standards.

Battery Requirements

Outlines the method for calculating and the specifications for the required backup batteries.

ABS Box Information

Provides physical dimensions and weight specifications for the GEKKO panel enclosure.

Identifying Components

GEKKO Main Board

Identifies the main circuit board and its connection terminals for the GEKKO panel.

Communication Interfaces

Describes the interface modules used for connecting GEKKO panels to a Chameleon Network.

EN54 Information

System Limitations

Terms, Definitions and Abbreviations

Installation

Introduction

Covers the physical installation process, required parts, and connection procedures for the GEKKO system.

Control Panel Installation

Details recommended placement and essential precautions for installing the GEKKO control panel.

Repeater Installation

Explains the procedure for installing CHAMELEON REPEATERS within the Chameleon Network system.

Panel Connections

Guides on connecting various components to the GEKKO main board, including ESD precautions.

Communication Channels

Describes how the GEKKO panel connects to a Chameleon network and supports external displays.

Extra Display

Details the connection and use of Chameleon Display units with the GEKKO panel.

Network Repeaters

Explains the use of CHAMELEON-REPs for network redundancy in a daisy-chained structure.

Analogue Loop(s)

Details the connection of addressable devices to analogue loops and loop integrity monitoring.

Conventional Sounders

Describes the connection and monitoring of conventional sounder circuits on the GEKKO panel.

Commissioning

Introduction

Explains that commissioning verifies correct connections and hardware functionality post-installation.

The Panel Buttons

Identifies and describes the function of the LEDs and buttons on the GEKKO fire alarm control panel.

Panel Controls

Details the operation of panel controls including Buzzer Silence, System Reset, Lamp Test, and Disablements.

Programming Functions

Complete List of Functions

Provides a comprehensive list of all available programming functions for the GEKKO panel.

Key Usage Guide

Explains how to navigate the panel's menu system and use the keypad for programming.

Function Descriptions

Offers detailed explanations for various programming functions, categorized by function number.

Technical Specifications

Power Supply and Charger

Lists the detailed electrical specifications for the panel's power supply and battery charger.

Sensor / Loop Circuits

Specifies technical details for analogue loop circuits, including device limits and loop current.

Conventional Sounder Circuits

Details specifications for conventional sounder circuits, including current limits and fault monitoring.

Auxiliary Relay Outputs

Provides the specifications for the panel's auxiliary fire and fault relay outputs.

Repeater Specifications

Lists the operating temperature, dimensions, and supply voltage for the repeater unit.

Declaration of CE Conformity