Preparing the Remote Control
Wireless Remote Control
Page 26 (40)
atos_cs_rev01_en_rev-c 2012-09-03
9. Wireless Remote Control
Your ATOS system will be delivered with a wireless remote control.
Remote Control with Accessories
1 x wireless remote control.
The remote control allows for measure-
ments without using the mouse or key-
board.
1 x receiver for the wireless remote con-
trol. The receiver is operated at a USB
connection of the measuring computer.
(R03, AAA, Micro: 1.5 V)
1 x bag for the wireless remote control.
9.1 Preparing the Remote Control
Equip the wireless remote control with the battery and insert the re-
ceiver into the USB connection of the measuring computer.
To Next Page
Loading...
