Types for Mobile Operation
Measuring System Types
Page 6 (40)
atos_cs_rev01_en_rev-c 2012-09-03
• ATOS sensor with stereo cameras, fringe projector, controller and
power supply.
• Stand for secure and steady hold of the ATOS sensor.
Please only use stands which are released by GOM for this sen-
sor type. Otherwise the stand with the sensor may fall over!
• Calibration panel for high-precision calibration.
• High-performance PC system with Microsoft Windows 7 operating
system and separate network interface card for the Gigabit data
link.
The factory settings of the separate network interface card are op-
timized for the Gigabit data link and must not be changed! For
more information see section 12.2.1.
• ATOS application software (Windows) as of V7.5
2.2 Types for Mobile Operation
Mobile ATOS COMPACT SCAN - Out-of-the-box system
• Transport case
• Carbon fiber tripod stand and foldable calibration cross to guaran-
tee high mobility
• Manual rotation table
When using the carbon fiber tripod stand it may probably fall over!
• Foldable calibration cross
When calibrating using the foldable calibration cross, the highest
possible accuracy will not be achieved! For more information see
section 9.
To Next Page
Loading...
