Checking and Cleaning the Air Filter
Page 37 (40)
atos_cs_rev01_en_rev-c 2012-09-03
11. Checking and Cleaning the Air Filter
Check the air filter of the sensor in regular intervals. We recommend
cleaning the filter every 3 months or more often.
You thus avoid a shutdown of the sensor due to overtemperature
during operation.
11.1 Removing the Air Filter
The steps 1 to 7 show how to remove the air filter.
Make sure that no
dirt gets into the
projector area
while the projec-
tor focus is not
screwed in.
To Next Page
Loading...
