GOM ATOS COMPACT SCAN 5M - Table of Contents

Table of Contents
Page 3 (40)
atos_cs_rev01_en_rev-c 2012-09-03
Table of Contents
Important Notes __________________________________ 2
Symbols _______________________________________________ 2
Safety and Health Hazard Notes ___________________________ 2
Legal Notes ____________________________________________ 2
Table of Contents _________________________________ 3
1. Introduction _______________________________ 5
2. Measuring System Types ____________________ 5
2.1 Types for Stationary Operation _____________________ 5
2.2 Types for Mobile Operation________________________ 6
3. Sensor Types ______________________________ 7
3.1 Sensor Types and Technical Data __________________ 7
4. Information About the Sensor ________________ 8
4.1 Sensor Configurations ____________________________ 9
4.2 Definition of Terms Referring to ATOS COMPACT SCAN
300 and 500 ____________________________________ 10
4.3 Definition of Terms Referring to ATOS COMPACT SCAN
SO ____________________________________________ 10
5. Lenses ___________________________________ 11
5.1 Lenses ________________________________________ 11
6. Standard Control Elements and LED Indicators _ 12
6.1 Web Interface __________________________________ 13
7. Operation of 3D Ball Head ___________________ 14
7.1 Positioning of Sensor ___________________________ 14
7.2 Sensor Fixture__________________________________ 14
7.2.1 Mechanism of Sensor Fixture _______________________ 14
7.2.2 Mounting Direction of Sensor on Locking Mechanism ____ 15
7.2.3 Fixture of Sensor on Locking Mechanism _____________ 16
8. Sensor Setup _____________________________ 17
8.1 General _______________________________________ 17
8.2 Measuring Volume ______________________________ 17
8.3 Changing the Camera Positions (Step by Step) ______ 17
8.3.1 Initial Situation: Sensor in Position 300 _______________ 18
8.3.2 Loosen Cameras from Support _____________________ 18
8.3.3 Remove Camera Screws and Loosen Support _________ 19
8.3.4 Remove Camera Support 300 ______________________ 19
8.3.5 Insert Camera Support SO _________________________ 20
8.3.6 Fix Camera Support SO ___________________________ 20
8.3.7 Insert Camera Screws ____________________________ 21
8.3.8 Fix Cameras ____________________________________ 21
8.3.9 Changed Sensor with Camera Support SO ____________ 22
8.4 Set Up Sensor with ATOS V7 Software _____________ 23
8.4.1 Camera Angle ___________________________________ 24
8.4.2 Adjust the Laser Pointers __________________________ 25
Steps to adjust the laser pointers ________________________ 25
9. Wireless Remote Control ___________________ 26
9.1 Preparing the Remote Control ____________________ 26
9.2 Explanation of the Function Keys __________________ 27
10. Sensor Calibration _________________________ 28
10.1 How to Handle Calibration Objects _________________ 28
10.2 Calibration Conditions ___________________________ 29
10.2.1 When is Calibration Required? ______________________ 29
10.2.2 Prerequisites ____________________________________ 29
10.3 Calibration Using Calibration Panel CP 40 ___________ 29
10.3.1 Handling Instructions for Calibration Panel CP 40 _______ 30
10.3.2 Loading the Calibration Data _______________________ 31
10.3.3 Preparing the Calibration Process ___________________ 31
10.3.4 Calibration Process _______________________________ 32
10.3.5 Calibration Result ________________________________ 32
10.4 Calibration Using Calibration Cross CC 30 __________ 33
10.4.1 Handling Instructions for Calibration Cross CC 30 _______ 34
10.4.2 Entering Calibration Data into ATOS _________________ 34
10.4.3 Preparing the Calibration Process ___________________ 35
10.4.4 Calibration Process _______________________________ 35
10.4.5 Calibration Result ________________________________ 36
10.4.6 Quick Calibration _________________________________ 36
11. Checking and Cleaning the Air Filter __________ 37
11.1 Removing the Air Filter __________________________ 37
12. Cabling, Network Port _______________________ 38
12.1 Cabling ________________________________________ 38
12.1.1 Cabling with Laptop ______________________________ 38
12.1.2 Cabling with 19" PC ______________________________ 39
12.2 Network Port ___________________________________ 40
12.2.1 Notes for Network Administrators ____________________ 40