184
Locate the disk location:
This function makes it easy for you to quickly find the disk by lighting the blue indicator of the
corresponding slot of the disk. A single physical disk or all member disks included in a logical disk can
be located.
As shown in Figure 6-121, select the disk to be located on the PD Mgmt interface and press F2.
Figure 6-121 Select the disk to be located
Figure 6- 121
Enter the interface shown in Figure 6-122 and select Locate->Start to complete the disk location
operation.
Figure 6-122 Select Locate- >Start
To Next Page
Loading...
Need help?
General
