5.2.8. "Input" Page
The input page regroups information and settings about the time base and the time input
available on the LEDI
®
Network TDS.
Time Base
State
► This field provides information about the type of oscillator and the current accuracy of
the time base in relation to the synchronisation input. For example, when the LEDI
®
Network TDS is switched on, the time base needs time to control its oscillator. The type
of synchronisation source also influences this value.
Current Frequency Source
► This field indicates that the LEDI
®
Network TDS works with its own oscillator, not with
an external frequency input.
Enable autonomous mode
► This box allows you to switch the server to “Free Running” mode, where it will
autonomously run a synchronisation source. When this box is checked, the following
options appear.
To Next Page
Loading...