Gorgy Timing LEDI NETWORK TDS V1 - INTRODUCTION

MDE-LEDI-NETWORK-TDS-4099V3.0
7
ENGLISH
1. INTRODUCTION
This document is the instruction manual for the LEDI
®
NETWORK TDS V1 and the LEDI
®
NETWORK TDS GPS Rail Din TH 35. These products are accurate and easily configurable
time servers.
Each server communicates through the following network protocols:
► IPv4 et IPv6
► HTTP(S)
► SNMP v1, v2c, v3
► Telnet
►
SSH
► FTP
► SMTP
► Syslog
► (S)NTP
► ENDMI (to detect Gorgy Timing
products on the IP network)
Security features ensure that the server delivers reliable and continuous timing information.
1.1. LEDI
®
NETWORK TDS V1 RACK
The server synchronises through an NTP Ethernet 10/100 base T or DCF or GPS time input.
In case of a DCF or GPS input, the heart of the time base is a temperature-compensated
quartz oscillator (TCXO) which limits deviation when the time source is unavailable.
There are 3 available time outputs: AFNOR NFS 87500 / IRIG B, IMPULSION, NTP.