Gorgy Timing LEDI NETWORK TDS V1 - Output Page

MDE-LEDI-NETWORK-TDS-4099V3.0
59
ENGLISH
► Input Leap Indicator ➔ Gives the status of the leap second indicator derived from the
synchronisation input.
► Output Leap Indicator ➔ Gives the status of the leap second indicator sent from the
time outputs.
5.2.9. "Output" page
This page shows the output cards detected on the LEDI
®
NETWORK TDS and allows them
to be configured one by one.
The extension cards appear in a table at the top of the page.
►
The different types of card are:
NAME
Description of card
NTP
NTP output (V2, V3, V4): Unicast, Multicast, Broadcast
IRIG
Output 1 x AFNOR NFS 87500/IRIG B (Modulated 1Khz)
POLAR PULSE
Serial polarised pulse output