NTP statistics
► NTP Requests received indicates the number of queries received by the network
module since start-up.
► NTP Requests rejected indicates the number of NTP requests rejected by the network
module since start-up.
► NTP Requests served indicates the number of responses sent by the network module
since start-up.
The number of requests being processed is equal to the number of requests received minus
the number of responses minus the number of rejected requests.
Time corrections
This section provides a table logging time leaps over one second per synchronisation input.
► Date is the internal date before the leap.
► SRC is the IP address of the NTP server or the synchronisation source number at the
time of the leap.
► Offset is the new time minus the old time.
► Uptime is the server running time at the time of the leap.
NTP Configuration watcher
► This part is exclusively used by Gorgy Timing. It is not supported in the provided
software.
SCP Time Logging
► Enable SCP Logging enables the detailed logging of NTP responses by the client on an
SD card.
► Requests trains recorded is the number of recorded exchanges.
To Next Page