Grace Continuum II - Page 12

12
3
Building the Frame Table (Continued)
Full Frame Assembly
2
Attach one of the corner braces to the top left corner of the frame with the 5 mm Allen
wrench and four M8 x 16 mm SBHCS screws.
4
Use two M8 x 16 mm SBHCS screws and the 5 mm Allen wrench to attach the left table
section to the middle leg.
M8 x 16 mm
SBHCS (x2)
Use two M8 x 16 mm SBHCS screws to attach the left frame leg to the underside of one of
the table sections. Tighten with the 5 mm Allen wrench.
M8 x 16 mm
SBHCS (x2)
Left Frame Leg
Table Section
Middle Leg
M8 x 16 mm
SBHCS (x4)
Corner Brace
Note: Keep table and leg as square as possible while attaching brace.